Advantek Networks ALN-328R Bedienungsanleitung PDF herunterladen (Seite 37)

EKI-6311GN-User_Manual V2.1 Page 31

find the IEEE 802.11b/g/n Wireless Outdoor CPE, so that malicious attack by some illegal STA

could be avoided.

Wireless Separation: Wireless separation is an ideal way to enhance the security of network

transmission. Under the mode except wireless client mode, enable “Wireless Separation” can

prevent the communication among associated wireless clients.

WMM Support: WMM (Wi-Fi Multimedia) is a subset of 802.11e. It allows wireless

communication to define a priority limit on the basis of data type under AP mode only, thus those

time-sensitive data, like video/audio data, may own a higher priority than common one. To

enable WMM, the wireless client should also support it

Max. Station Number: By checking the “Max. Station Num” the CPE will only allow up to 32

wireless clients to associate with for better bandwidth for each client. By disabling the checkbox

the CPE will allow up to 128 clients to connect, but it is likely to cause network congestion or

poor performance.

Security Setting:

To prevent unauthorized radios from accessing data transmitting over the connectivity, the IEEE

802.11a/n Wireless Outdoor CPE provides you with rock solid security settings.

VLAN Tab

If your network uses VLANs, you can assign one SSID to a VLAN, and client devices using the SSID are

grouped in that VLAN.

To allow users on the VLAN to access the WEB page of the

IEEE 802.11a/n Wireless Outdoor CPE, you

need to enable “Enable 802.1Q VLAN” and assign a management VLAN ID for your device. Make

sure the assigned management VLAN ID is identical to your network VLAN ID to avoid failures of

accessing the Web page of the EKI-6311GN.

Figure 5 Management VLAN ID

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 78 79

Keine Kommentare

Advantek Networks ALN-328R Bedienungsanleitung Seite 37